Ace Air, Inc. Blog: Archive for the ‘Air Conditioning Maintenance’ Category

Common Air Conditioning Condensation Problems

Monday, April 9th, 2012

The beauty of air conditioning in Gustine is that we don’t have to do anything to live in a cool climate even when it’s boiling outside.  Programmed to adjust automatically, modern thermostats make it even easier.

It is very inconvenient therefore (not to mention uncomfortable) when our unit is not functioning properly forcing us to pay attention.  Suddenly over-heated, our first inclination may be to call for help, but often the expensive repair can be accomplished easily or avoided completely.

Air Conditioning 101

The process of conditioning air to a cooler temperature involves rapid evaporation and condensation of chemicals called refrigerants.  These are compounds having properties that allow them to change from liquid to gas and back at low temperatures.

When the liquid evaporates and transforms into gas it absorbs heat.  Compressed tightly together again, the matter condenses back into liquid with a residue of unwanted moist heat that must be released to the outdoors.

Over the course of handling the air to cool it, air conditioners are able to filter dust and dehumidify the air as well.  This release of moisture is why air conditioners have drains.

Condenser Coils

As the heat is removed from the gas, it forms condensation that must be drained from the system.  Tiny particles accumulate along the path, prone to shifting and resettling until they become lodged and can form a significant enough blockage to hamper the efficiency of the unit.  If the drain line becomes blocked, the unit drips or overflows the pan and works its way back into the house, causing damage and potentially mold.

This is when panic is inclined to call for the cavalry.

Easy Fix

A simple act of maintenance performed twice a year and requiring no tools can eliminate the problem and the risk of an unnecessary and expensive visit from a company like (Your Company).  To check and maintain your condensate drain, the steps are the same for both window and whole house units.

On the interior side, remove the panel of the unit and find the drain line, usually a plastic tube.  If the pan is full of water, there is a blockage.  On a whole house system, find where the plastic tube exits the house, making sure that it is above ground and clear to drain away. Flush the line with a short burst from a hose.

Regular maintenance is simply a 1/2 cup of warm water poured down the tube to ensure a clean and free flowing pipe.

Where It Counts

An important aspect of air conditioning repairs is flushing of air conditioning drain lines. If you have any questions about how to do this call Ace Air Conditioning.  We would be happy to explain the process to you and take care of any other aspects of HVAC maintenance you might need.

Continue Reading

HVAC Tips: Components of an Air Conditioner

Thursday, March 15th, 2012

As a Merced citizen, do you ever wonder how that amazing machine that keeps you cool all summer actually works? How exactly does an air conditioner use electricity to create cool air and dehumidify your home? It’s actually an ingenious bit of technology developed over a century ago using four major components and a thermostat.

How these parts are implemented may change depending on the type of air conditioner you have and how much space it’s tasked with cooling, but the following components are standard in all AC units:

  • Evaporator – There are two sides to an air conditioner – the warm side and the cool side. The Evaporator is on the cool side and is paired with a fan that blows air over the coils. The air then chills and blows into your home to keep you cool.
  • Condenser – The condenser is the device responsible with transferring heat within the air conditioner. An air conditioner doesn’t actually make anything cool – it just removes heat from one environment and places it into another. By removing heat from one set of coils and transferring it to another, it creates the cooling effect that the evaporator then uses to cool your home
  • Expansion Valve – The expansion valve is responsible for regulating how much refrigerant passes into the evaporator coils. This refrigerant immediately expands when it reaches the evaporator coil due to the pressure drop.
  • Compressor – Once the refrigerant has depressurized and turned back into a gas, it is passed to the compressor which is then tasked with converting it back into a liquid and passing it into the warm part of your air conditioner.

And of course, this entire mechanism is monitored and regulated by a thermostat which tells the air conditioner when to turn on and what level of cooling is needed by your home. The system can also be setup in one of a couple different ways. Self-contained units, like window units, house the entire mechanism in a single box, while a central air conditioner separates the two units – the hot side with the compressor and condenser are placed outside the house.

Because there are so many parts and they work in harmony to create the cool environment you want, your air conditioner needs to be carefully maintained. Regular maintenance is a must for every component, so call Ace Air Conditioning if you ever need it serviced.

Continue Reading

Air Conditioning Tips: Things to Check on Your Broken AC Before Calling a Professional

Monday, February 13th, 2012

A broken air conditioner in Atwater is a stressful situation, especially since you’re considering whether you need a professional to come out. No one likes spending hundreds of dollars on air conditioning maintenance, so before you call anyone, make sure to check these problems. You may be able to fix the problem on your own without spending a dime.

Thermostat

The thermostat is one of the most common problems you’ll have with an air conditioner.  Make sure the thermostat wasn’t knocked out of position and the sensors near your coils are in the right place. Often times, a bumped sensor or a slightly off thermostat can cause this kind of problem and as a result, you’ll be left without steady cooling.

Check Your Filters

Another common problem that can cause issues with your air conditioner is filter clogging. While the system will continue to run with a clogged filter, there are a few issues that might pop up – it could smell funny or you might notice icing on the outside line (a major problem). If you allow the filter to get so clogged as to block the air flow from your system, you can expect a number of problems to crop up.

Blower Belts

Check the system’s blower belt for damage like cracking, excess slack or general wear. A blower belt that isn’t properly installed or that needs to be replaced will reduce air flow which can result in ice buildup or poor air flow – it will make it harder for your system to maintain a steady temperature.

Check the Outdoor Unit

Check to make sure nothing is blocking the outdoor unit. Clean the condenser coils and remove any debris that might have built up around the outdoor unit. Often, slowed air flow is caused by nothing more than leaves piled in front of your condenser.

If none of these problems is the culprit or if you fix them all and your system continues to struggle, it is time to call Ace Air Conditioning.

Continue Reading